AIR-COOLED INDUSTRIAL CHILLERS FOR MOLD COOLING

Scroll type AIR-COOLED INDUSTRIAL CHILLER=== RCM-A series are capable of controlling precisely the mold temperature in plastic molding process as so to shorten molding cycle and speed product formalization. The principle of heat exchange is adopted for cooling. They can achieve rapid cooling, stable temperature controlling, and will be little effected by the surounding factors. Therefore they are necessary good equipments in modern industry.

1. Cooling temperature range 5-35 oC.
2. High-capacity tube-in-shell evaporater with very good heat exchange performance especially for high ambient temperature condition.
3. Tube-fin double condensers with excellent heat transfer and rapid cooling.
4. Stainless steel warm-keeping water tank.
5. R22 refrigerant to be used for efficient cooling.
6. R407 environment-friendly refrigerant is optional to use.
7. Overload protection for compressor, pump and blower.
8. Independent temperature controller, anti-freeze protection.
9. Phase sequence protection for control circuit, refrigeration loop controlled by high and low pressure switch.
10. Warm-keeping design for all piping to avoid partial convection.
11. Suitable for machine cooling in industries of plastics, electroplating, foodstuff, electronic products, bleaching and dyeing, ultrasonics.

		RCM-3A	RCM-4A	RCM-5A	RCM-8A		RCM-10A	RCM-12.5A	RCM-15A	RCM-20A	RCM-25A	RCM-30A
Chilling capacity	kw	7.5	10	13.5	20		25.5	31.5	38.5	50	62.5	77.5
	Kcal/hr	6500	9000	11500	16500		22000	27000	33000	44000	54000	66500
Compressor output power	HP	3	4	5	8		10	12.5	15	20	25	30
Refrigerant	-	R22    R407C
Evaporator	-	Plate type
Blower power	Kw	0.25		0.19*2	0.25*2			0.25*4		0.42*6
Tank capacity	L	50		65	110			150		270	350	400
Pumping Power	Kw	0.75			1.1			2.2		2.2
Pump Max flowrate	L/min	80			150			250		400
Pump Max pressure	kg/cm2	2.0
Pipe size outlet	lnch	1"*1			1½"			2"				2½"
Pipe size intlet	lnch	1"*1			1½"			2"				2½"
Drainage outlet	lnch	1/2"
Overflow Port	lnch	1/2"
Weight	Kg	120	140	180	220	280		350	400	450	550	600
Extemal size mm
L		1090	1090	1250	1350		1350	1700	1700	1900	2150	2150
W		760	760	760	860		96	1200	1200	1200	1480	1480
H		1250	1250	1320	1560		1620	1750	1750	1750	1800	1800

Plesase excuse for not note if some specifications of products are changed

Note: 1) The cooling capacity is measured when the outgoing water temperature is 12oC and ambient temperature is 30oC.

2) The refrigerant can use R407.For coding,use "N".For example,RCM-10A-N.

3) The stardard voltage is 3¢,380V,50Hz. We also can make it as your requirments.

• The device can cool the water temperature ranging from 7 to 35oC. The low cooling temperature can be customized as per customer's needs. The micro computer controls the system running and the temperature can be precise to 1oC. The overload protection device is used for compressor and pump to prolong the service life. The multi protection device (antifreezing protection, high and low pressure protection and flow protection) ensures the system safety. The water tank is made from the stainless steel and has a heat insulation layer. Freezing pipelines have the insulation layer to improve refrigerating efficiency. Low speed and noise blower fan. The blower fan stops along with the compressor, thus effective electric energy saving.

Air-cooled industrial chiller mould temperature controller schematic structure:

New updated design cool and heat exchange machines are suitable for plastic industry.Industril chillers can control
precisely the mold temperature in plastic molding process as so to shorten
molding cycle and speed product formalization. The principle of heat exchange
is adopted for cooling. They can achieve rapid cooling, stable temperature
controlling, and will be little effected by the surounding factors. Therefore
they are necessary good equipments in modern industry.