30KVA 60KVA 100KVA 250KVA 500KVA 1000KVA نوع التغذية المرتدة محاكاة شبكة الطاقة

Model

AC2000-33300

AC2000-33600

AC2000-331000

AC2000-332000

AC2000-334000

AC2000-336000

AC2000-338000

Capcity

30kVA

60kVA

100kVA

200kVA

400kVA

600kVA

800kVA

AC

input

Phase

3P4W+PE

Voltage

Phase voltage：220V±10%，line voltage：380V±10%

Frequency

50/60Hz±3Hz

AC output

Phase

3P4W

Voltage

Phase voltage：10～300.0V

Frequency

45.0～65.0Hz

Rated voltage（220Vac）

90A

136A

180A

302A

607A

911A

1215A

Set voltage accuracy

Resolution: 0.1V, accuracy: 0.2% × Read value + 0.2% × Full scale value

Set frequency accuracy

Resolution: 0.1Hz, accuracy: 0.05%

Test voltage accuracy

Resolution: 0.1V, accuracy: 0.2% × Read value + 0.2% × Full scale value

Test frequency accuracy

Resolution: 0.1Hz, accuracy: 0.05%

current

Resolution: 0.1a/1a, accuracy: 0.3% × Display value + 0.3% × Rated output value

Power

Resolution: 0.1kw/0.01kw/0.001kw, accuracy: 0.45% × Read value + 0.45% × Full scale value

Frequency stability

≤0.1%

Voltage distortion

Line load：THD＜2%

Transient recovery time

20ms

Voltage peak coefficient

1.41±0.1

Source voltage effect

≤1%

Load effect

≤1%

Overload capacity

105% < output ≤ 110% turn off the output in 10 minutes; Turn off the output in 5 minutes when 110% < output ≤ 120%; 120% < output ≤ 150% 2 seconds to turn off the output;

Protect

IGBT overheating, IGBT overcurrent, transformer overheating, output overvoltage, output undervoltage, output overcurrent, output overload and output short circuit

Efficiency

＞86%

Display mode

LCD

Online adjustment function

The output voltage and frequency can be adjusted on line (45.0 ～ 65.0hz)

Function

1. Based on the principle of rectifier + inverter, it can realize 100% energy flow in both directions between load and power grid, and has two functions of power supply and load.

2. Single phase or three-phase AC output can be selected.

3. It can simulate low voltage ride through (LVRT) test curve.

4. It can synthesize fundamental wave and each harmonic wave to simulate power quality adaptability test.

5. With step programming mode, each step can set the output voltage, frequency, operation time, etc., can set the cycle operation, and can set the number of cycles.

6. AC output has a variety of programming modes, which can realize the gradual change and jump of output voltage and frequency. The starting voltage, frequency and ending voltage, frequency and time of gradual change can be set

7. Phase setting range: 0-360 degrees;

8. It can control the change rate of voltage and frequency.

9. The output limits of voltage and current can be set

Communication interface

RS485 (standard), RS232 (optional), Ethernet (optional)

Temperature

0～40℃

Humidity

20～90%RH