Titan Heaters PTFE Immersion Tubular Heaters

Over the side vertical – parallel with tank position heater constructed of thick gauge metal elements covered with heavy wall fluoropolymer (PTFE).

Introduction:

The PTFE Jacked Three, Six and Nine Element Vertical Style Tubular Element Series is an Over-the-Side Parallel to tank heater designed to offer superior performance utilizing 10 watts per square inch (1.5w/cm²) of heating capacity.

Titan Heaters PTFE Immersion Tubular Heaters are an excellent choice for heating Aqueous acid, alkaline, anodizing and pickling solutions up to 212F (100 C). The heater head (terminal enclosure) is available in Nema 4X compliant (consult factory) or vapor tight, corrosion resistant – flame retardant polypropylene, equipped with 3 foot (.9m) corrosion resistant thermoplastic flexible conduit.Titan Heaters is a good choice for an immersion heater.

Characteristics

• Three and six element tubular only

1,000 to 12,000 watts at 120, 240, 480 volts. 208, 380, 415 and 600 and other custom voltages available. (consult factory)

• Nine element tubular only

3,000 TO 18,000 watts at 120, 240, 480 volts. 208, 380, 415 and 600 and other custom voltages available. (consult factory)

• Excellent Chemical resistance

Durable heavy wall fluoropolymer (PTFE) encases the stainless steel tubular elements offering maximum chemical resistance.

• Superior Performance

Low watt density, 10 watts/sq.inch (1.5w/cm²) minimizes buildup for longer heater life. Fast heat dissipation.

• Excellent Uniform Heating

Over the side design parallel to tank heating.

• Corrosion Resistant Terminal Enclose Head

Vapor tight, corrosion resistant – flame retardant polypropylene terminal enclosure with 3 foot (.9m) flexible corrosion resistant thermoplastic flexible conduit.

Available in NEMA 4 compliant enclosure (consult factory for specifications).

• Safety Features

• rounded internal stainless steel elements.
  

• Options Availble (Consult Company)

• Single phase power.
• Lower watt densities for higher viscous solution and technical acids.
• Standard guards are constructed of polypropylene not for use in Chromic Acid or temperatures above 180F. Available with Fluoropolymer (PTFE) guards for CHROMIC ACID.
• Custom vertical riser length available (cold zone).
• Longer wire and conduit length available.
• Thermal protection available in various temperatures based on request. Standard protection is fuse operation. Available with self-reset or manual reset protection.
• Available with SEESAW® liquid level control, highly recommended for ultimate safety protection.
• MSDS Sheets required.